AccuReader for GM 10-Cut / GM10

AccuReader for the GM 10 cut keyway locks.

Designed to read actual depths for each space in GM 10-cut locks (excluding ignitions & Ortec locks).

Comes with directions and a handy storage container.

DIMENSIONS: 5 x 6 x 1 in.

This system will allow you to read the door/trunk wafers in GM10 cut vehicles. Following a few simple steps it takes only minutes to read the depths for each cut in each.

The GM10 AccuReader is not designed to be used on the newer GM10 cut key commonly referred to as a Z key.

The GM10 AccuReader comes with 2 keys. One is designed to read any wafers in positions 1-5 and the other key is designed to read any wafers found in positions 6-10. Using both keys allows for reading the more shallow wafer positions with a fully or almost fully inserted key increasing the accuracy.

The AccuReader works on the process of elimination to decipher the correct depths of the lock. By checking the deepest cut first you eliminate what the cuts are not. Therefore it is essential to always read depth slide #4 first.

Compatible with the following:

• 2000 – 2005 Buick Lesabre
• 1997 – 2005 Buick Park Avenue
• 2003 – 2007 Buick Rainier
• 2002 – 2007 Buick Rendezvous
• 1994 – 1995 Buick Skylark
• 2007 Buick Terraza
• 2003 – 2006 Cadillac CTS
• 2000 – 2005 Cadillac Deville
• 1998 – 2004 Cadillac Seville
• 1995 Chevrolet Cavalier
• 2000 – 2005 Chevrolet Monte Carlo
• 2005 – 2008 Chevrolet Uplander
• 1999 – 2005 Chevrolet Venture
• 1994 – 1995 Oldsmobile Achieva
• 2001 – 2003 Oldsmobile Aurora
• 1999 – 2004 Oldsmobile Silhouette
• 2001 – 2005 Pontiac Aztek
• 2000 – 2005 Pontiac Bonneville
• 1994 – 1995 Pontiac Grand Am
• 1999 – 2003 Pontiac Grand Prix
• 1999 – 2004 Pontiac Montana
• 1995 Pontiac Sunfire