Heavy Duty Anodized Aluminum Center Pivot Continuous Geared – designed mainly for retrofit work and are applied to the exposed surfaces of the door and frame. Also available in standard duty models.
- Easily replace butt hinges since no door or frame adjustments are necessary and are more versatile with restricted frame faces.
- BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
- Fasteners – Frame Portion – All fasteners are #12-24 x 7/16″ #10 Phillips Head, Type C, thread forming.
- Heavy duty model: 12 fasteners required for each leaf.
- Wood screws available on request (specify on order).
- Fasteners – Door Portion – a. Thru-bolt – 1/4-20 x 1-5/8″. – Heavy Duty Hinges – 4 required. – b. Shoulder Bolt – 1/4-20 x 1″ PCH. – Heavy Duty Hinges – 4 required. – c. Pan Head Self Drilling #12 x 3/4″. – Heavy Duty Hinges – 6 required.
- Heavy duty hinge (HD1): 3″ between bearing centers.
- Heavy duty hinge (HD3): 3″ between bearing centers.
- HD1 hinges conform to Grade 2-150, Grade 1-300, and Grade 1-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
- HD3 hinges conform to Grade 3-150, Grade 3-300, and Grade 3-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
- Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to standard UL10B, UL10C and UBC 7.2 (positive pressure) for up to a 3-Hour (A-Label) fire listing for all 4 ft. 0 in. x 10 ft. 0 in.
- and 8 ft. 0 in. x 10 ft. 0 in. door and frame assemblies. Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall or masonry construction.
- Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
- All hinges meet criteria of UBC 7.2 for positive pressure.
- Special FirePins are only required on 3-Hour (A-Label) assemblies.
- Certain door and frame conditions may require an extra 1/32″-1/16″ clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
- PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship wit hthe exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
- Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for heavy duty models: 83″ and 85″ = 27 bearings, door weight = 540 lbs.; 95″ = 31 bearings, door weight = 620 lbs.; 120″ = 39 bearings, door weight = 780 lbs.
- Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
- Width: 1-3/16” (30.2 mm) (frame side – leaf).
- Width: 2” (50.8 mm) (door side – leaf).
- Width: 3-3/16” (80.9 mm) (total width of hinge).
- Cap Width: 25/32” (19.8 mm).
- Height: 3/4” (19.1 mm) (total height of hinge).
Fire Rated – UL10C – Positive Pressure
PemkoHinge Fire Rating – UL76Y2
C – ClearCFSCP-HD1: C – Clear Anodized Aluminum